Cooline DWL SERIES Betriebsanweisung PDF herunterladen (Seite 13)

USER’S GUIDE

InRow RC ACRC100 Series

Control Console

How to Log On

Overview

You can use either a local (serial) connection, or a remote (Telnet or SSH) connection

to access the control console.

Use case-sensitive user name and password entries to log on (by default, apc and apc

for an Administrator, or device and apc for a Device-Only User). A Read-Only User

cannot access the control console.

Remote access to the control console

You can access the control console through Telnet or Secure SHell (SSH), depending

on which is enabled. (An Administrator can enable these access methods through the

Telnet/SSH option of the Network menu.) By default, Telnet is enabled. Enabling SSH

automatically disables Telnet.

Telnet for basic access. Telnet provides the basic security of authentication by user

name and password, but not the high-security benefits of encryption. To use Telnet to

access the control console from any computer on the same subnet:

1. At a command prompt, type telnet and the System IP address for the InRow

RC (when the InRow RC uses the default Telnet port of 23), and press

ENTER.

For example:

telnet 139.225.6.133

If you cannot remember your user name or password, see How to

Recover from a Lost Password.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 102 103

Keine Kommentare

Cooline DWL SERIES Betriebsanweisung Seite 13